Calibration & Blending
Guides for projector calibration, blacklevel compensation, and edge blending.
Use this section when you are working with multi-projector installations that require geometric correction, edge blending, or blacklevel matching across projectors.
Most procedures here require the Brainsalt Calibrator system — a camera-based calibration tool that runs alongside Backstage. If Calibrator is not installed on your server, contact Brainsalt support before proceeding.
Start with:Compensate Projector Blacklevel with Calibrator for standard multi-projector blending, or Correct White Level when using Mechanical Trim Gates if your installation uses physical trim gates without Calibrator.
|
Guide |
What it covers |
Requires Calibrator |
|---|---|---|
|
Dome Projection with Spherical Distortion Lenses and Calibrator |
Full dome calibration using camera-based Calibrator |
Yes |
|
Correct blacklevel inconsistencies across multiple projectors |
Yes |
|
|
Adjust digital blending to work with physical trim gates |
No |