System:Shutdown

Last updated 5 August 2026

System:Shutdown enables the Videoserver to be easily shut down

or restarted through the Node editor.

Pin Info

Pin	Info
`Input 1: Command [String]` `Input 2: Shutdown [Bang]` `Input 2: Shutdown after [Timestamp]` `Input 3: Reboot [Bang]` `Input 3: Reboot after [Timestamp]` `Input 4: Cancel [Bang]`	1-Command[String]: Allows the control of the Nodes functionthrough predefined commands*. 2-Shutdown[Bang]: Shuts down the Videoserver afterthe default delay. 2-Shutdown after[Timestamp]: Shuts down the Videoserver after the time value. 3-Reboot[Bang]: Reboots the Videoserver after thedefault delay. 3-Reboot after[Timestamp]: Reboots the Videoserver afterthe Time Value. 4-Cancel[Bang]: Interrupts any active Shutdown or Rebootcommand.
Node Parameters
Countdown: Shows the remaining time until Shutdown/reboot once started. Default Delay: Defines the default time between command reception and command execution. Cancel Shutdown: Cancels an active Shutdown/Reboot command must be clicked before the Countdown reaches 0.

Input 1: Command [String]

Input 2: Shutdown [Bang]

Input 2: Shutdown after [Timestamp]

Input 3: Reboot [Bang]

Input 3: Reboot after [Timestamp]

Input 4: Cancel [Bang]

1-Command[String]: Allows the control of the Nodes functionthrough predefined commands*.

2-Shutdown[Bang]: Shuts down the Videoserver afterthe default delay.

2-Shutdown after[Timestamp]: Shuts down the Videoserver after the time value.

3-Reboot[Bang]: Reboots the Videoserver after thedefault delay.

3-Reboot after[Timestamp]: Reboots the Videoserver afterthe Time Value.

4-Cancel[Bang]: Interrupts any active Shutdown or Rebootcommand.

Node Parameters

Countdown: Shows the remaining time until Shutdown/reboot once started.

Default Delay: Defines the default time between command reception and command execution.

Cancel Shutdown: Cancels an active Shutdown/Reboot command must be clicked before the Countdown reaches 0.