Outputs:Disable
Last updated 5 August 2026
Outputs:Disable enables or disables logical outputs at runtime. A non-zero
value on Disable turns the selected target off; 0 turns it back on. The state
is runtime-only and is not saved with the project.
| Pin | Info |
|---|---|
|
|
1-Disable[Int]: Non-zero disables the target output(s); 0 re-enables them. |
| Node Parameters | |
|
Target: Choose "All" logical outputs or a specific one. The disable state is runtime-only, not serialized. Expand: None |
|