Control:MergeN

Input 1: Data 1 [Samples, Pack]

Input 2: Data 2 [Samples, Pack]

Input 3: Mode [Int]

Input 4: Fade To [Int]

Input 4: Set Fade [Float]

(1.0-2.0)

1-Data 1[Samples]: Sets the first Container Data merges itwith the second and emits it as Samples.

1-Data 1[Pack]: Sets the First Container Data, merges itwith the second and emits it as Pack.

2-Data 2[Samples]: Sets the Second Container Data, merges itwith the first and emits it as Samples.

2-Data 2[Pack]: Sets the Second Container Data, merges itwith the first and emits it as Pack.

3-Mode[Int]: Sets the Merge mode of the Node*

4-Fade to[Int]: Triggers the Node to fade to the selected Input**. (Valid input 1 or 2)

4-Set Fade[Float]: Sets the Fade value for how much to use of input 1 or 2**.(valid input between 1 and 2)

Output 1: Merged [Samples, Pack]

1-Merged[Samples]: Emits the Base Samples with all injection added**.

1-Merged[Pack]: Emits the Base Pack with all injections added**.

Mode: Defines the method of how the Node merges the two input containers*. Pin is injected into the Base Container. (only in Fade mode) -Fade: Defines what percentage of each input should be merged to the output container -Transition (ms): Defines how long the Fade from one channel to another should last -FadeToChannel: Triggers the Node to fade from one input samples to another.

Clock: Shows which of the two clocks is more stable and is used to emit the output samples.

F1 shows the frequency of Input 1

F2 shows the frequency of Input 2

Expand:

None