Control:NGate

Last updated 5 August 2026

Control:NGate are used to control multiple data channels.

By default they have 2 inputs, one to control the Ngate status and a second one which is the first data channel.

The 2 default outputs are Ngate state (0/1) and the first data channel output

Pin Info

Pin	Info
`Input 1: Toggle [Bang]` `Input 1: Enable [Int]` `Input 2: 1 [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp, Pack, Bang]`	1-Toggle[Bang]: Opens the gate if its closed,closes the Gate if its open. 1-Enable[Int]: Controls the state of the Gate* 2-{N}[All]: First Data Lane, data is either blockedor forwareded, depending on Gate state.
`Output 1: Enabled [Int]` `Output 2: 1 [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp, Pack, Bang]`	1-Enabled[Int]: Emits 1 if NGate is opened and 0 if its closed. 2-{N}[All]: Emits data received in corresponding data input if Gate is open.
Node Parameters
Checkbox: Shows if the Gate is closed or open, can be clicked to toggle the state. #Lanes: Defines the number of Data lanes the Node switches at once.(max=32) +/- Buttons: Allow an easy change in lanes.

Input 1: Toggle [Bang]

Input 1: Enable [Int]

Input 2: 1 [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp, Pack, Bang]

1-Toggle[Bang]: Opens the gate if its closed,closes the Gate if its open.

1-Enable[Int]: Controls the state of the Gate*

2-{N}[All]: First Data Lane, data is either blockedor forwareded, depending on Gate state.

Output 1: Enabled [Int]

Output 2: 1 [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp, Pack, Bang]

1-Enabled[Int]: Emits 1 if NGate is opened and 0 if its closed.

2-{N}[All]: Emits data received in corresponding data input if Gate is open.

Node Parameters

Checkbox: Shows if the Gate is closed or open, can be clicked to toggle the state.

#Lanes: Defines the number of Data lanes the Node switches at once.(max=32)

+/- Buttons: Allow an easy change in lanes.