Audio:LTCStream

Last updated 5 August 2026

Audio:LTCStream creates an LTC Audio stream or

converts a Timestamp input into a LTC Audio Stream,

that can be routed to an Audio output.

Pin Info

Pin	Info
`Input 1: Scheduler [ResourceId]` `Input 2: Offset [Timestamp]`	1-Enable/Disable[Int]: 1 starts the LTC progress, 0 stopps it,0 also blocks Timecode input conversion. 1-Action[String]: Controls the Progress of the Node* 1-Timestamp[Timestamp]: Sets the Progress of the Stream,can be used to convert a Timestamp Stream into a LTC stream.
Node Parameters
Stream dropdown: Defines in which LTC framerate the Timestamp is converted Sequence dropdown: Sends out the progress of the selected Sequence as LTC timecode**. Checkbox: Shows if the Stream is Stopped or Playing, does not work in Sequence mode. Expand: dBFS:Defines how high the max/min amplitudes of the LTC streams will be. Offset: Defines by how much time the LTC Output is shifted to the Timestamp Input. Timestamp: Displays the current Progress of the LTC Stream, turns Grey when Paused/Stopped. Controls: Allows the manual control of the LTC stream.

Input 1: Scheduler [ResourceId]

Input 2: Offset [Timestamp]

1-Enable/Disable[Int]: 1 starts the LTC progress, 0 stopps it,0 also blocks Timecode input conversion.

1-Action[String]: Controls the Progress of the Node*

1-Timestamp[Timestamp]: Sets the Progress of the Stream,can be used to convert a Timestamp Stream into a LTC stream.

Node Parameters

Stream dropdown: Defines in which LTC framerate the Timestamp is converted

Sequence dropdown: Sends out the progress of the selected Sequence as LTC timecode**.

Checkbox: Shows if the Stream is Stopped or Playing, does not work in Sequence mode.

Expand:

dBFS:Defines how high the max/min amplitudes of the LTC streams will be.

Offset: Defines by how much time the LTC Output is shifted to the Timestamp Input.

Timestamp: Displays the current Progress of the LTC Stream, turns Grey when Paused/Stopped.

Controls: Allows the manual control of the LTC stream.