Time:Timer

Last updated 5 August 2026

Time:Timer provides a Timestamp Stream that can

be controlled and started from any point.

Pin Info

Pin	Info
`Input 1: Reset [Bang]` `Input 1: Start from [Timestamp]` `Input 2: Enable/Disable [Int]` `Input 2: Store [Timestamp]`	1-Reset[Bang]: Sets Timer to 0 and startsits progress if it is stopped 1-Start from[Timestamp]: Sets the Nodes Progressto this Timestamp and starts progress if stopped. 2-Enable/Disable[Int]: Stops the Timer Progress on a 0and starts it on non 0 input. 2-Store[Timestamp]: Sets the Progress of the Nodeto this Value.
`Output 1: Output [Timestamp]`	1-Timecode[Timestamp]: Emits the nodes progress every 20msif Node is active.

Input 1: Reset [Bang]

Input 1: Start from [Timestamp]

Input 2: Enable/Disable [Int]

Input 2: Store [Timestamp]

1-Reset[Bang]: Sets Timer to 0 and startsits progress if it is stopped

1-Start from[Timestamp]: Sets the Nodes Progressto this Timestamp and starts progress if stopped.

2-Enable/Disable[Int]: Stops the Timer Progress on a 0and starts it on non 0 input.

2-Store[Timestamp]: Sets the Progress of the Nodeto this Value.

Output 1: Output [Timestamp]

1-Timecode[Timestamp]: Emits the nodes progress every 20msif Node is active.