Math:>=

Last updated 5 August 2026

Math:= Result is True when its inputs are the same.

Math:!= Result is True when its inputs do not match.

Math:< Result is True if input 1 is smaller than Input 2.

Math:<= Result is True if Input 1 is smaller or matches Input 2.

Math:> Result is True if input 1 is bigger than input 2.

Math:>= Result is True if input 1 is bigger or matches Input 2.

TRUE = Int(1); FALSE =Int(0)

Pin Info

Input 1: Operand 1 [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp]

Input 2: Operand 2 [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp]

1-Operand 1[*]: Defines the first Operand of theCompare Operation, and triggers an output.

2-Operand 2[*]: Stores as Operand 2 in theNode and compares it with any Operand 1.

Output 1: Result [Int]

Output 2: Result true [Bang]

1-Result[Int]: Emits 1 if result is True or 0if its False.

2-Result true[Bang]: Emits a Bang if the Compareresult is True.
Node Parameters

Mode:allows the node to switch to a different Compare Mode

Buffer: Shows the stored second operand that Operand 1 is compared to**

Expand:

Autocast: Unchecking will disable the automatic casting of different Datatypes.