Outputs:Disable

Last updated 5 August 2026

Outputs:Disable enables or disables logical outputs at runtime. A non-zero

value on Disable turns the selected target off; 0 turns it back on. The state

is runtime-only and is not saved with the project.

Pin Info

Pin	Info
`Input 1: Disable [Int]`	1-Disable[Int]: Non-zero disables the target output(s); 0 re-enables them.
Node Parameters
Target: Choose "All" logical outputs or a specific one. The disable state is runtime-only, not serialized. Expand: None

Input 1: Disable [Int]

1-Disable[Int]: Non-zero disables the target output(s); 0 re-enables them.

Node Parameters

Target: Choose "All" logical outputs or a specific one. The disable state is runtime-only, not serialized.

Expand:

None