Sequence:FrameServer

Last updated 5 August 2026

Sequence:FrameServer allows a Sequence to fluently follow a

Timecode or Nomalized Target position, the progress gets faster

if the Target is further away and slower the closer it gets.

Pin Info

Pin	Info
`Input 1: Framenumber [Int]` `Input 1: Progress [Float]` `Input 2: Sequence [ResourceId]`	1-Framenumber[Int]: Sets the Nodes Target Progressby Framenumber. 1-Progress [Float]: Sets the Nodes Target Progress as aNormalized value 0.0=Beginning 1.0= End. 2-Sequence[RID]: Sets the nodes Sequence Reference.
Node Parameters
Sequence: Dropdown to select the Sequence that should be controlled by this node Requested Position: The Target Position as timestamp Float and Framenumber are converted to this value. Adjusted Tempo: Shows the current speed of the Node, Its default limit is double speed (-2.0 to 2.0) Expand: None

Input 1: Framenumber [Int]

Input 1: Progress [Float]

Input 2: Sequence [ResourceId]

1-Framenumber[Int]: Sets the Nodes Target Progressby Framenumber.

1-Progress [Float]: Sets the Nodes Target Progress as aNormalized value 0.0=Beginning 1.0= End.

2-Sequence[RID]: Sets the nodes Sequence Reference.

Node Parameters

Sequence: Dropdown to select the Sequence that should be controlled by this node

Requested Position: The Target Position as timestamp Float and Framenumber are converted to this value.

Adjusted Tempo: Shows the current speed of the Node, Its default limit is double speed (-2.0 to 2.0)

Expand:

None