Control:MergeN
Control:MergeN allows you to merge two
containers like Pack and Samples into a single one.
| Pin | Info |
|---|---|
|
(1.0-2.0) |
1-Data 1[Samples]: Sets the first Container Data merges itwith the second and emits it as Samples. 1-Data 1[Pack]: Sets the First Container Data, merges itwith the second and emits it as Pack. 2-Data 2[Samples]: Sets the Second Container Data, merges itwith the first and emits it as Samples. 2-Data 2[Pack]: Sets the Second Container Data, merges itwith the first and emits it as Pack. 3-Mode[Int]: Sets the Merge mode of the Node* 4-Fade to[Int]: Triggers the Node to fade to the selected Input**. (Valid input 1 or 2) 4-Set Fade[Float]: Sets the Fade value for how much to use of input 1 or 2**.(valid input between 1 and 2) |
|
|
1-Merged[Samples]: Emits the Base Samples with all injection added**. 1-Merged[Pack]: Emits the Base Pack with all injections added**. |
| Node Parameters | |
|
Mode: Defines the method of how the Node merges the two input containers*. Pin is injected into the Base Container. (only in Fade mode) -Fade: Defines what percentage of each input should be merged to the output container -Transition (ms): Defines how long the Fade from one channel to another should last -FadeToChannel: Triggers the Node to fade from one input samples to another. Clock: Shows which of the two clocks is more stable and is used to emit the output samples. F1 shows the frequency of Input 1 F2 shows the frequency of Input 2 Expand: None |
|