Control:Switch

Last updated 5 August 2026

Pin Info

Pin	Info
`Input 1: Switch [Int]` `Input 2: Input [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp, Pack, Bang]`	1-Switch[Int]: Defines what output the input data is forwarded to. 2-Input[All]: Any data received here is forwareded to the selected output.
`Output 1: Switch [Int]` `Output 2: Output 1 [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp, Pack, Bang]` `Output 3: Output 2 [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp, Pack, Bang]`	1-Switch[Int]: Emits the selected output. 2-Output 1[All]: Emits data received at the input if Switch is 1. 3-Output 2[All]: Emits data received at the input if Switch is 2.
Node Parameters
Switch: Defines what output is chosen emit the input data, if the selection is 0 all input is blocked. #Outputs: Defines the available number of Outputs for this Node.

Input 1: Switch [Int]

Input 2: Input [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp, Pack, Bang]

1-Switch[Int]: Defines what output the input data is forwarded to.

2-Input[All]: Any data received here is forwareded to the selected output.

Output 1: Switch [Int]

Output 2: Output 1 [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp, Pack, Bang]

Output 3: Output 2 [BitMatrix, Float, Int, ResourceId, Samples, String, Timestamp, Pack, Bang]

1-Switch[Int]: Emits the selected output.

2-Output 1[All]: Emits data received at the input if Switch is 1.

3-Output 2[All]: Emits data received at the input if Switch is 2.

Node Parameters

Switch: Defines what output is chosen emit the input data, if the selection is 0 all input is blocked.

#Outputs: Defines the available number of Outputs for this Node.