Time:TimeCodePlura

Last updated 5 August 2026

Time:Plura TC provides a way to receive Timecode

in Backstage through Plura Timecode Hardware.

This node only works if a Plura Timecode Card

is installed in the Videoserver.

Pin Info

Pin	Info
`Input 1: PCL index [Int]`	1-PCL index[Int]: Sets Timecode Slot of the installedPlura card this Node should follow.
`Output 1: Timecode [Timestamp]` `Output 1: Action [String]`	1-Timecode[Timestamp]: Emits the received Timecode fromthe selected Plura Timecode Index. 1-Action[String]: Emits Play when Timecode is receivedand Pause if Timecode is stopped to control a connected Sequence.

Input 1: PCL index [Int]

1-PCL index[Int]: Sets Timecode Slot of the installedPlura card this Node should follow.

Output 1: Timecode [Timestamp]

Output 1: Action [String]

1-Timecode[Timestamp]: Emits the received Timecode fromthe selected Plura Timecode Index.

1-Action[String]: Emits Play when Timecode is receivedand Pause if Timecode is stopped to control a connected Sequence.