Nodes: Brainsalt

Brainsalt:BrainsaltDisplay allows you to interact with the Touchscreen

on the Frontpanel of Brainsalt B7 Videoservers

Brainsalt:CalibratorLite drives projector calibration for a screen surface.

It runs geometric alignment and black-level calibration, can restore stored

snapshots, and reports status and progress on its outputs.

Brainsalt:ClusterSlaveLegacy emulates most functions of Brainsalts old Playmaker Software Cluster control

Each Player (Slave) in the Cluster will have this Patch in the Node Editor

It can pull Files from a central Content Management Server via a FTP server

It sends a Heartbeat to the Control Server (Master) to let it know if all Players are present

It also supports a Live view for a pre split images where a big Content Frame

is split up in smaller Parts for each Player, sent over FPT which then Play this smaller frame

in a Sequence (needs to be connected on the Livemode Seq-Control output.

Brainsalt:CollaborationServer allows you to draw on a selected

Surface/Display using a InkCollab Client on one or multiple Tablets in the same network.

There can only be a single instance of this Node within a Project.

Brainsalt:ConductorInputController allows you to control Conductor

DMX channels through Backstage node Editor.

Brainsalt:CopyClientControl allows the Control of the CopyClient batch file,

that pulls pre split frames from a central content management server.

Brainsalt:MediaManagerLiveView

receives control commands from Media Manager to start and stop Live View.

Brainsalt:MovieLicensingSystem allows Movies that you bought

the licence for to be verified and Played through Backstage.

Brainsalt:PlaymakerCommandConverter converts old playmaker commands

into the new Backstage command format.

Brainsalt:PlaymakerProgressEmulator converts the Output of a Stepper

and makes it emit the same feedback as the old Brainsalt Playmaker software used to.

This can be very helpful when upgrading old systems with a new Videoserver.

Brainsalt:SynchronizeConductorLegacy is the old way to synchronize Backstage sequences

to the Brainsalt DMX show programming software Conductor.

A connected Sequence:Sequence node will synchronize, its progress with whatever

HFX show is loaded in Conductor.