Brainsalt Hub Videos

Recordings for the server side of the job: getting a Brainsalt server onto the network, then configuring its displays and outputs. Watch these before the Backstage videos — a show cannot be built on a server that is not set up.

Every video page here reads as a written walkthrough as well. Alongside the player you get the click paths the narration never says out loud, the settings that actually matter, and what to check when a step does not take — so these pages can be followed without watching anything. The written guide linked beside each one stays the reference for exhaustive field detail.

Getting started

Display and GPU configuration

Work through these in the order listed — EDID first, then Mosaic, then the rest. The dependencies are real, and they run one way:

• The EDID sets the ceiling. Output depth defaults to whatever the EDID advertises, and only outputs running the same timing can be combined into a mosaic or locked to a common sync.

• Mosaic and desktop removal lock the EDID. An output inside a mosaic grid, or removed from the Windows desktop, will not accept a new EDID until you clear the grid or return it to the desktop.

• Virtual monitors come last — they are what gives third-party applications somewhere to run once the real outputs have left the desktop.

Not recorded yet

These guides have no video so far. Each is a written page under Brainsalt Hub - Set Up and Manage the Server:

• First sign-in and changing the factory password · users and roles · backup and restore

• Server health and hardware status · power control · GPU output signal status

• Display startup options and resetting the display configuration

• Remote access: the BMC KVM console and the browser Remote UI